Ships across Europe & the UK Custom requests answered within 2 working hours
€ EUR
EN
Tagsfab — Label Manufacturing

Cosmetic & soap labels

A label that holds in the bathroom, and looks like the price

The short answer: anything that meets water, steam or oil needs a synthetic film — polypropylene for printed colour, clear polyester for the minimal look. Paper is for dry products and gift boxes. Then add the finish: soft touch, foil, relief varnish. From 100 labels per design.

Skincare dropper bottle and amber jar with minimal soft-touch labels

Formats

Small containers, real constraints

ContainerLabelTypical sizeThe difficulty
Serum 30 mlBody wrap55 × 40 mmFitting the INCI list — consider a peelable layer
Cream jar 50 mlLid + bodyØ 45 mm + 100 × 25 mmTwo small runs rather than one
Shampoo 250 mlFront + back75 × 105 mmMust bend without creasing on a squeezable bottle
Soap barBelly band150 × 55 mmCut to the bar, not to a standard
Roll-on 10 mlWrap70 × 25 mmVery small type; keep the design sparse
Candle 200 gBody + base85 × 60 mmCLP panel usually goes underneath

Sizes above 150 × 105 mm are quoted as a custom request.

Finishes

Where the perceived value comes from

Soft touch laminated label held between fingers

Soft touch

A velvet, almost rubbery surface. The finish customers notice before they read anything.

Gold hot foil stamping on a label

Hot foil

Gold or silver pressed into the stock — reflective in a way no printed metallic ink can imitate.

Raised relief varnish on a label

Relief varnish

A raised logo you feel under the thumb. Pairs best with a matte lamination.

All three are available from 100 labels — see the full finishing room.

FAQ

Cosmetic labels — what brands ask us

Will a cosmetic label survive the shower?

Only if it is a synthetic film. White polypropylene or clear polyester with a laminate resists running water, steam and repeated handling with wet hands. Paper labels — even laminated ones — will eventually lift at the edges in a bathroom. For a shower gel, a film is not a premium option, it is the minimum specification.

What about oils and essential oils?

Oils are more aggressive than water: they creep under the edge of a label and attack the adhesive and the ink. Use a polypropylene or polyester film with a laminate, never an uncoated paper. If your formula is rich in essential oils, mention it and we spec a reinforced adhesive.

How small can the INCI list be printed?

We hold fine detail down to about 4 pt on coated and synthetic materials, but legibility matters more than the technical minimum: EU cosmetic rules require the ingredients list to be visible and legible. On very small containers, the usual solution is a peelable two-layer label — the front carries the brand, the layer underneath the full INCI list.

Do soap labels need a CLP hazard panel?

Cold-process soap sold as a cosmetic follows cosmetic rules, not CLP. But a soap sold as a cleaning product, and most candles and reed diffusers, do require CLP pictograms and hazard statements. If you are unsure which regime applies, put the question in your request — it changes what has to fit on the label.

Which finishes work for a premium range?

Soft touch lamination for a velvet feel, gold or silver hot foil for the name, and relief varnish to raise a logo you can feel. Pearlescent and metallic stocks change the whole surface rather than an area of it. All are available from 100 labels.

Free quote

Describe your labels — a specialist answers within 2 working hours

Material, size, quantity, container, constraints: a few lines are enough. You get a firm price, or our questions, by e-mail.

Answered within 2 working hours · no commitment

The formula is yours. The finish is ours.

Material, size, finish — priced instantly, from 100 labels.

Price my cosmetic labels
Get a quote — answered within 2 working hours