3D Domed Resin Labels · Functional
A label with thickness, and the light knows it
The short answer: doming pours a clear polyurethane resin over a printed label, where it self-levels and cures into a thick, glass-like dome with rounded edges. It stops being a sticker and becomes a badge — which is why it ends up on control units, machines, dealer plates and premium equipment. From €330 per 100.
Any shape within this size — rectangle, round, oval or custom die-cut.
VAT invoice · card or bank transfer · proof before production · ±5 % quantity tolerance
- Printing
- 1 option
- Protection
- 1 option
- Adhesives
- 1
- Sizes
- 44 formats
- Smallest
- 15 × 10 mm
- Largest
- 85 × 70 mm
- Quantities
- 100 → 1 000, more quoted
- Variable data
- available
Printed from €330 per 100, unprinted on rolls from €61. Production 2 to 10 working days after proof approval.
What you are paying for
Thickness, and everything that follows from it
The resin does three things at once. It magnifies — a domed logo reads larger and deeper than the flat print underneath. It protects — a millimetre of cured polyurethane shrugs off knocks, cleaning products and UV in a way no lamination approaches. And it signals: a badge with weight and depth is read as part of the machine rather than as a label applied to it.
The cost follows from the process. Each dome is poured, levelled and cured, so at €330 per 100 it is one of the most expensive things in the catalogue — and the price barely moves with quantity, because the resin is the cost. If the badge only needs to look machined, the flat brushed aluminium at €152 does most of the job.
- Resin
- clear polyurethane
- Base
- printed polyester film
- Adhesive
- reinforced
- Effect
- magnifies, protects, adds depth
- Shapes
- simple outlines only
- Smallest
- 15 × 10 mm
- From
- €330 / 100
Before you design it
Three constraints the resin imposes
Simple shapes
The resin self-levels and holds its own edge by surface tension. Circles, ovals, rounded rectangles work; a narrow spike or a deep notch does not.
Keep the design off the edge
The dome curves at the rim, so anything within about 2 mm of the edge is distorted. Centre the mark and leave a margin.
Flat surfaces only
A cured dome does not bend. It belongs on a flat panel — never on a bottle, a tube or a tight curve.
Price by quantity
What a run actually costs
Up to 15 × 10 mm, full colour, 3d resin dome — die, setup and printing included.
| Quantity | Run price | Per label |
|---|---|---|
| 100 | €330 | €3.30 |
| 200 | €331 | €1.66 |
| 300 | €333 | €1.11 |
| 500 | €333 | €0.67 |
| 1 000 | €333 | €0.33 |
Excluding VAT and delivery. Other sizes, finishes and quantities are priced in the configurator above.
Where it is used
Products that take this material
FAQ
Doming — what customers ask us
What exactly is doming?
A clear polyurethane resin poured onto the printed label. It self-levels, holds its edge by surface tension and cures into a thick, transparent dome with rounded sides — magnifying the print and protecting it under about a millimetre of hard resin.
Why is it so much more expensive?
Because each label is poured and cured individually, and the resin is the main cost. At €330 per 100 the price also falls slowly with quantity, unlike printed labels where the die and setup dominate the first hundred. It is a badge, priced like one.
Does it resist outdoor use?
Well — the resin handles UV, knocks and cleaning products far better than a lamination. It is the standard finish for dealer badges, machine plates and equipment that lives outside, on a flat surface.
Can I have any shape?
Simple outlines only: round, oval, rounded rectangle, shield. The resin needs a continuous edge to hold against, so fine spikes, thin necks and deep notches are not possible. Send the outline and we tell you before the proof.
Can it go on a curved surface?
No. Once cured the dome is rigid — it belongs on a flat panel. For a curved or moulded surface, a flat printed film with a reinforced adhesive is the right specification: see polyethylene.
It stops being a label and becomes a badge.
Resin-domed labels, from €330 per 100.