Ships across Europe & the UK Custom requests answered within 2 working hours
£ GBP
EN
Tagsfab — Label Manufacturing

Guides · updated 9 November 2026

EU Battery Regulation: the labelling and QR code rules coming on 18 February 2027

The short answer: Regulation (EU) 2023/1542 gives every battery sold in the EU one marking system. Two parts already apply — the CE marking and the crossed-out wheeled bin. From 18 February 2027 every battery must also carry a QR code, and LMT, EV and industrial batteries above 2 kWh get a battery passport behind it. The full information label of Annex VI has no fixed date yet: it starts 18 months after an implementing act that, on 9 November 2026, has not been published.

Brushed aluminium rating plate with CE marking, serial number, weight and date of manufacture on a grey motor housing wet with rain

In 30 seconds

The 30-second answer: two marks today, a QR code in February 2027, the full label later

Battery labelling under Regulation (EU) 2023/1542 arrives in steps, and only some have a fixed date:

  • CE marking applies now: conformity assessment since 18 August 2024 (Article 96(2)(b)), mark at least 5 mm high.
  • The crossed-out wheeled bin is compulsory since 18 August 2025 (Article 13(4)), at 3 % of the largest side, with Cd or Pb beneath above 0.002 % cadmium or 0.004 % lead.
  • From 18 February 2027 every battery carries a QR code (Article 13(6)), printed or engraved visibly, legibly and indelibly (Article 13(7)).
  • The same day, LMT, EV and industrial batteries above 2 kWh need a battery passport (Article 77) — one record, so one code, per battery.
  • The Annex VI information label waits for an implementing act not yet in EUR-Lex on 9 November 2026.
  • The label must outlast the battery’s working life: film, adhesive and protection are chosen for heat and fluids.

Scope

Five categories, and the category decides what the QR code must open

Every battery falls into one of the categories of Article 3, which sets the extra particular on the label (capacity or minimum duration) and what sits behind the QR code (a passport or an information page). Weight and use decide, not chemistry: a 4 kg power-tool pack is portable, the same cells in a 20 kg e-scooter pack are an LMT battery.

Battery categories under Article 3 of Regulation (EU) 2023/1542 and their labelling consequences
CategoryDefinition (Art. 3)Typical productsExtra on the labelThe QR code opens
Portable, non-rechargeableSealed, 5 kg or less, not industrial, EV, LMT or SLIAA cells, button cellsMinimum average duration, « non-rechargeable » (13(3))Label information, declaration of conformity, waste information (13(6)(b))
Portable, rechargeableSame definitionPower-tool and laptop packsCapacity (13(2))Same as above
LMT batterySealed, 25 kg or less, traction of e-bikes, e-scooters and other light vehiclesE-bike and e-scooter packsCapacity (13(2))Battery passport (Art. 77)
SLI batteryStarting, lighting or ignition, also backup in vehicles and machineryStarter batteriesCapacity (13(2))Information as above, plus recovered cobalt, lead, lithium or nickel (13(6)(c))
Industrial batteryDesigned for industrial use, or any other battery above 5 kg that is not EV, LMT or SLIStationary storage, forklift packs—Passport above 2 kWh; information page at or below
Electric vehicle batteryTraction in M, N or O vehicles, or L vehicles above 25 kgCar and van packs—Battery passport (Art. 77)

The dates

Four dates are fixed, the information label is still open

The table reads the consolidated text of 13 August 2026, which includes every amendment published so far; none of them changed Article 13.

Labelling calendar of Regulation (EU) 2023/1542, checked on EUR-Lex on 9 November 2026
DateWhat appliesArticleStatus
18 February 2024The Regulation applies; Cd and Pb symbols (no separate date in 13(5))96(2), 13(5)In force
18 August 2024Conformity assessment, the basis of the CE marking96(2)(b), 17, 19, 20In force
18 August 2025Separate collection symbol on all batteries13(4)In force
18 February 2027QR code on all batteries; passport for LMT, EV and industrial above 2 kWh13(6), 77(1)Fixed
18 August 2026 or 18 months after the implementing act, whichever is laterAnnex VI label; capacity; minimum duration and « non-rechargeable »13(1) to 13(3), 13(10)Not yet applicable

Article 13(10) asked the Commission to adopt, by 18 August 2025, implementing acts with harmonised specifications for these labels. A draft was notified to the World Trade Organization on 22 December 2025, comments closing on 20 February 2026 (G/TBT/N/EU/1181); on 9 November 2026 we found no adopted act in EUR-Lex. Since the later date wins, the label becomes compulsory 18 months after that act enters into force — May 2028 if it entered into force today. We do not guess the real date; watch the Official Journal.

A proposal is also pending: COM(2025) 981 would rewrite point 8 of Annex VI, Part A to cover substances of very high concern at 0.1 % weight by weight or more (COM(2025) 981). Until it is adopted, the current wording applies.

The content

What the label must show: ten particulars, three marks and a code

A compliant battery label combines the ten particulars of Annex VI, Part A, the contact details required of manufacturers and importers, the CE marking, the collection symbol and, from 18 February 2027, the QR code. Annex VI, Part A lists:

  1. information identifying the manufacturer (Article 38(7));
  2. the battery category and its identification (Article 38(6));
  3. the place of manufacture;
  4. the date of manufacture, month and year;
  5. the weight;
  6. the capacity;
  7. the chemistry;
  8. hazardous substances present, other than mercury, cadmium or lead;
  9. a usable extinguishing agent;
  10. critical raw materials above 0.1 % weight by weight.

Two articles add what is often forgotten. Article 38(6) wants a model identification and a batch, serial or product number; Article 38(7) wants the manufacturer’s name or trade mark, a postal address with a single contact point and, if available, web and e-mail addresses, in a language end-users understand — and Article 41(3) asks the same of the importer. Mercury has left the marking list: above 0.0005 % it is simply restricted (Annex I).

Anatomy of an EU battery label under Regulation (EU) 2023/1542Schematic label for a light means of transport battery pack: manufacturer and importer details at the top, battery category, model and batch, place and date of manufacture, voltage, capacity and energy, chemistry and weight, hazardous substances, extinguishing agent and critical raw materials, then along the bottom the CE marking, the crossed-out wheeled bin collection symbol and a QR code.Schematic label for an LMT battery pack · not to scaleMANUFACTURER NAMEPostal address, single contact point · web addressImporter: name · postal addressLMT battery · model XB-36-14Batch B26-11 · serial no. 004817Made in: city, country · 01/202736 V · 14 Ah · 504 WhLi-ion (NMC) · 3.1 kgHazardous substances: as declared for the modelExtinguishing agent: as declared for the modelCritical raw materials above 0.1 %: as declaredCECd or Pb below, if over limit123456781Manufacturer, importername, address · Art. 38(7), 41(3)2Category, model, batchArt. 38(6) · Annex VI, A 23Place, month and yearAnnex VI, Part A 3-44Weight, capacity, chemistryAnnex VI, A 5-7 · Art. 13(2)5Substances, agent, CRMAnnex VI, Part A 8-106CE markingat least 5 mm high · Art. 207Collection symbol3 % of largest side · Art. 13(4)8QR codefrom 18 Feb 2027 · Art. 13(6)
Schematic of a label for a light means of transport battery, not to scale. The particulars are placeholders; use the official artwork of Annex VI, Part B for the bin.

Article 13(7) puts the labels and the QR code on the battery itself; only where its nature and size make that impossible or unwarranted do they move to the packaging and the accompanying documents — the housing for a pack, the blister card and leaflet for a coin cell. The text does not define « indelibly » and names no test, which is why the material choice matters.

On the label

Size and legibility: the bin scales with the battery, the CE has a floor, the QR has neither

The collection symbol is the only element whose size the Regulation calculates: at least 3 % of the largest side, or 1.5 % of the surface on a cylindrical cell, capped at 5 × 5 cm. Below 0.47 × 0.47 cm it leaves the battery for the packaging, at no less than 1 × 1 cm (Article 13(4)). The Cd or Pb symbol sits beneath it and covers a quarter of its area (Article 13(5)).

Minimum collection symbol by battery size, Article 13(4) — square side rounded up, dimensions are examples
BatteryReference surfaceRequired areaSquare sideWhere
Storage cabinet, face 600 × 1 000 mm3 % of 600 000 mm²18 000 mm²capped at 50 mmBattery
E-bike pack, face 300 × 100 mm3 % of 30 000 mm²900 mm²30.0 mmBattery
Power-tool pack, face 120 × 80 mm3 % of 9 600 mm²288 mm²17.0 mmBattery
Pouch cell, 60 × 40 mm3 % of 2 400 mm²72 mm²8.5 mmBattery
AA cell, Ø 14.5 × 50.5 mm1.5 % of about 2 630 mm²39.5 mm²6.3 mmBattery
Coin cell, Ø 20 mm3 % of 314 mm²9.4 mm²3.1 mm, below 4.7Packaging, 10 × 10 mm min.

The AA line counts the whole cylinder, ends included; on the side wall alone it is 5.9 mm. If your authority reads « surface area » differently, its reading wins.

The CE marking keeps the proportions of its graduated drawing and is at least 5 mm high where no other dimension is set (Regulation (EC) No 765/2008, Annex II). The QR code has no size in millimetres: Annex VI, Part C asks for high contrast and a size a phone reads easily. We work to modules of at least 0.4 mm — the GS1 retail figure explained in our guide to GS1 Digital Link and QR codes — with a four-module quiet zone. A passport address of about 60 characters fits a 33 or 37-module symbol at medium error correction: roughly 16 to 23 mm square with its margin, against 10 mm for a marketing QR.

The code

The QR code links to hosted information — and for passport batteries, one code per battery

The QR code is a door, not a container: Article 3(24) defines it as a matrix code that links to information. For LMT, EV and industrial batteries above 2 kWh, behind it is the battery passport. For the others, it is the label information, the EU declaration of conformity, the due diligence report of Article 52(3) and the waste information of Article 74(1); SLI batteries add their recovered cobalt, lead, lithium or nickel. It must be complete, up to date and accurate — so it lives on a server you control, for the life of the battery.

The passport is individual. Article 77(2) covers information specific to each battery, including from its use, and Article 77(3) links the QR code to a unique identifier, both compliant with ISO/IEC 15459, parts 1 to 6, or equivalent. GS1 in Europe confirms that for these batteries the granularity level for the product passport is at item level (GS1, January 2025). Every pack carries a different code.

GS1 Digital Link is one way to build it: GS1 is an ISO/IEC 15459 issuing agency, and a Digital Link puts the GTIN and serial number in an ordinary web address — https://id.your-domain.eu/01/09520123456788/21/B26004817. The Regulation does not name GS1; other issuing agencies exist. Choose with your passport provider, send us the list, and we print it as numbered, barcode and QR labels, one code per label in the same run. For portable and SLI batteries the text ties the code to information, not to an individual record, so a code per model can do the job — confirm that reading with your authority.

The QR code in the texts
Compulsory from
18 February 2027
On
all batteries
Marking
visible, legible, indelible
Passport batteries
LMT, EV, industrial > 2 kWh
Identifier
ISO/IEC 15459-1 to -6
Passport granularity
each battery
Unique QR, run of 100
+ £106excl. VAT
Unique QR, run of 3 000
+ £139excl. VAT
Four white equipment labels, each with its own QR code and serial number, a smartphone reading one of them
One QR code per unit with its serial number in clear — the format a battery passport calls for.
Roll of white labels numbered 000001 to 000005, each with a different two-dimensional code, a laptop with the data file behind
Variable data on a roll: the supplement is per run, not per label — details in variable data, explained.

The substrate

Durability: a film, a reinforced adhesive and a protection chosen for heat and fluids

Because « indelibly » is not defined, the practical target is a label that stays legible and scannable for the battery’s working life: a synthetic film, never paper, a reinforced permanent adhesive, and a lamination or heat-cured print depending on temperature. Four questions decide: temperature at the label, fluids around it, the housing surface, and whether data is printed on your own line.

Battery label materials by constraint — prices per 100 from our grid on 9 November 2026
SituationFilmAdhesiveProtectionFrom, per 100
Pack housing, brand and pictogramsIndustrial white polyester, full colourReinforcedGloss lamination; matt over a QR£224excl. VAT, up to 35 × 30 mm
Rating-plate look on a metal enclosureMatt aluminium polyester, one colourReinforcedGloss lamination£177excl. VAT, up to 35 × 30 mm
Cell or module through a hot processWhite polyimide, to +250 °CPermanent, high temperatureNone, print heat-cured£160excl. VAT, up to 30 × 30 mm
Date and serial printed on your lineOverprintable white polyesterReinforcedNone on the bare panelquote tool
Electrolyte, acid or solventsPolyester or polyimide, testedPer testPer testcustom request

Heat

Standard films are rated to about +80 °C, enough for most pack housings. Above that, polyimide holds to +250 °C on our high-temperature labels, print heat-cured because a lamination would blister.

Fluids

Laminated polyester handles wiping, alcohol and oils. Electrolyte and acid are another matter: we test on your fluid through a custom request rather than promise from a datasheet. The same logic for solvents is in our GHS and CLP chemical labels guide.

Adhesive

Textured or powder-coated housings defeat a standard adhesive, which only touches the high points; the reinforced one flows into the texture — see choosing your label adhesive. Full strength comes after about 24 hours, so judge a test label the next day.

Gold-coloured film label on a circuit board with CE marking, crossed-out wheeled bin, serial number and barcode
CE marking and crossed-out wheeled bin on a heat-resistant film label for electronics — the two symbols every battery has carried since August 2025.

For the QR code itself: black on white, matt rather than gloss over it, and a white panel on a dark or metallic film instead of printing the code in reverse. All films for this work are on our page of industrial labels in polyester, aluminium polyester and polyimide; the four-colour version is industrial full colour, and the film with a bare panel for your own date and serial is overprintable polyester.

Being straight about it

Five mistakes that turn a battery label into a reprint

One QR code for a whole passport range. A code per model suits a portable battery, not an LMT, EV or industrial pack above 2 kWh. Plan the identifier list before the artwork.

A rented short link. When a shortener or QR subscription ends, every pack in the field points nowhere. Encode an address on a domain you control.

A bin drawn to fit the space. Its size follows the battery: calculate it first, then design around it.

Paper because the prototype used paper. Coated paper survives a dry shelf, not a pack’s working life. Start from a synthetic film.

Waiting for the implementing act. The QR code and passport have a date and share the label with the Annex VI particulars. Reserve that space now rather than redesign twice.

Before 18 February 2027

Checklist: ten points to settle before 18 February 2027

What a label printer can check; the legal checks belong to you, your notified body and the authority.

  • Category confirmed for each battery under Article 3.
  • CE marking at least 5 mm high, conformity assessment done (Articles 17 to 20).
  • Collection symbol at 3 % of the largest side, or 1.5 % on a cylinder, official artwork.
  • Cd or Pb beneath the bin above 0.002 % cadmium or 0.004 % lead.
  • Manufacturer and importer name, postal and web address, in the right language.
  • Model identification and batch or serial number (Article 38(6)).
  • QR destination on your own domain, live and complete for each category.
  • Passport batteries: one ISO/IEC 15459 identifier per unit, list ready for printing.
  • Space reserved for the Annex VI particulars pending the implementing act.
  • Film, adhesive and protection tested on the housing, at temperature, with the fluids around it.

Selling in Great Britain too? Check the UK rules separately — see EU vs UK labelling requirements. And keep green wording off the label unless it can be proved: environmental claims and sorting labels.

FAQ

Battery labels and the QR code — what manufacturers ask us

When do battery labels need a QR code in the EU?

From 18 February 2027, under Article 13(6) of Regulation (EU) 2023/1542, for every battery category. The code is printed or engraved visibly, legibly and indelibly on the battery, or on the packaging and accompanying documents where the battery’s size or nature makes that impossible.

Which batteries need a battery passport?

LMT batteries such as e-bike and e-scooter packs, electric vehicle batteries and industrial batteries above 2 kWh, from 18 February 2027 (Article 77(1)). The QR code links to a unique identifier attributed to each individual battery.

Is the full information label compulsory since 18 August 2026?

Not yet. Article 13(1) to (3) apply from 18 August 2026 or 18 months after the implementing act of Article 13(10), whichever is later, and on 9 November 2026 that act was not in EUR-Lex. The collection symbol and the CE marking already apply.

How big must the crossed-out wheeled bin be on a battery?

At least 3 % of the largest side, or 1.5 % of the surface on a cylindrical cell, up to 5 × 5 cm. Below 0.47 × 0.47 cm it goes on the packaging at 1 × 1 cm minimum. An e-bike pack with a 300 × 100 mm face needs about 30 × 30 mm.

Can the battery QR code use GS1 Digital Link?

It can be one way. The QR code and identifier must comply with ISO/IEC 15459 or equivalent, and GS1 is an ISO/IEC 15459 issuing agency; a Digital Link carries GTIN and serial in a web address on your own domain. The Regulation does not name GS1.

Can you print a different QR code on every battery label?

Yes, in the same run as the design, from 100 labels, on the industrial polyester films that offer it: + £106 excl. VAT on a run of 100, + £139 excl. VAT on 3 000. You send the list; we print it in order.

This guide is a practical summary written by a label manufacturer, not legal advice. The category of your battery, the content of its label and the conformity route are decided by the economic operator placing it on the market: check the current text of Regulation (EU) 2023/1542 on EUR-Lex and confirm with your notified body or the market surveillance authority of the Member State concerned before printing.

Official texts: Regulation (EU) 2023/1542 concerning batteries and waste batteries — EUR-Lex · Consolidated text of Regulation (EU) 2023/1542, 13 August 2026 — EUR-Lex · Proposal COM(2025) 981 amending Regulation (EU) 2023/1542 — EUR-Lex · Regulation (EC) No 765/2008, Annex II (CE marking) — EUR-Lex · WTO notification G/TBT/N/EU/1181, draft labelling implementing regulation — European Commission · GS1 Standards enabling the EU digital product passport, release 2.2 — GS1 in Europe

Still unsure?

Ask the person who makes them

The guide covers the general case — your label lives on a real product. Describe it in two lines and a label specialist (not a bot) answers within 2 working hours.

Answered within 2 working hours

Battery labels with the QR code built in

Polyester, aluminium polyester and polyimide films, one QR code per battery from 100 labels, a proof before production.

Price my battery labels
Get a quote — answered within 2 working hours